[1] C.-R. Lin, M.-K. BenDao, C.-W. Liou, Effects of Surface Modification on Improvement of Diamond Coating on Tungsten Carbide Cutting Tool, International Journal of Mechanical Engineering and Robotics Research, 5 (2016) 168–171.

[2] W.C. Tsai, D.Y. Hueng, C.R. Lin, T.C.K. Yang, H.W. Gao, Nrf2 expressions correlate with WHO grades in gliomas and meningiomas, International Journal of Molecular Sciences, 17 (2016) 722.

[3] H. Y. Hsu, C. R. Lin, M. K. BenDao, C. W. Liu, Preparation of diamond-like carbon films at room temperature for ultraviolet detecting application, Nanoscience and Nanotechnology Letters, accepted Sep. 2016.

[4] C. R. Lin, H. Y. Hsu, M. K. BenDao, C. W. Liu, W. E. Chen, H. H. Chang, and P. C. Pan, Development of metallic interlayer for nucleation of nanocrystalline diamond films toward MSM diamond-based photodectector applications, Physica Status Solidi A - Applications and Materials Science. (be published in 2017)

[5] C. R. Lin, C. W. Liu, M. K. BenDao, W. E. C, and H. Y Hsu, Effect of argon plasma pretreatment on diamond-like carbon films deposited on polymer substrate toward encapsulating layer for flexible display devices, Journal of Nanomaterials. (be published in 2017).

[6] C. R. Lin, M. K. BenDao, C. W. Liu, H. Y. Hsu, and J. A. Lee, Fabrication and electrochemistry characteristics of nickel-doped diamond-like carbon film toward applications in non-enzymatic glucose detection, Journal of Non-Crystalline Solids. (be published in 2017).

[7] C.-J. Lin, C.-R. Lin, S.-K. Yu, and C.-T. Chen, “Hysteresis modeling and tracking control for a dual pneumatic artificial muscle system using Prandtl-Ishlinskii model,” Mechatronics, vol. 28, 2015.

[8]  C.-J. Lin, C.-R. Lin, S.-K. Yu, and C.-C. Han, Singularity avoidance for a redundant robot using fuzzy motion planning, vol. 479–480. 2014.

[9] K.-Y. Peng, Y.-H. Ho, M.-C. Tsai, C.-R. Lin, P.-K. Wei, and D.-H. Wei, “Highly transparent and rub resistive nanostructured diamond-like carbon protective coatings for display application,” in Digest of Technical Papers - SID International Symposium, 2014, vol. 45, no. 1.

[10] K.-Y. Peng, D.-H. Wei, C.-R. Lin, Y.-C. Yu, Y.-D. Yao, and H.-M. Lin, “Hydrophobic and high transparent honeycomb diamond-like carbon thin film fabricated by facile self-assembled nanosphere lithography,” Japanese Journal of Applied Physics, vol. 53, no. 5 SPEC. IS, 2014.

[11] J.-H. Chou, C.-M. Hsu, S.-Y. Wang, C.-R. Lin, and J.-Y. Jhuang, “Characterizing microwave power in a MPCVD system using gaussian mixture modeling,” Applied Mathematics and Information Sciences, vol. 8, no. 6, 2014.

[12] C. R. Lin, D. H. Wei, and M. K. Bendao, Effects of nitrogen doping on nanocrystalline diamond/p-type Si toward solar cell applications, vol. 918. 2014.

[13] C.-R. Lin, H.-M. Chang, M.-K. Bendao, H. H. Chiang, and W.-E. Chen, “Fabrication of antireflection nanodiamond particle film by the spin coating deposition technique,” International Journal of Photoenergy, vol. 2014, 2014.

[14] C.-R. Lin, D.-H. Wei, M.-K. Bendao, H.-M. Chang, W.-E. Chen, and J.-A. Lee, “Effects of surface modification of nanodiamond particles for nucleation enhancement during its film growth by microwave plasma jet chemical vapour deposition technique,” Advances in Materials Science and Engineering, vol. 2014, 2014.

[15] C.-J. Lin, C.-R. Lin, and S.-K. Yu, “Computer-integrated micro-assembling with image-servo system using ANN,” Applied Mathematics and Information Sciences, vol. 8, no. 1, 2014.

[16] C.-J. Lin, C.-R. Lin, S.-K. Yu, and C.-R. Hsu, “Enhanced sliding mode control with CEMF compensation for tracking control of a piezoactuated flexure-based mechanism,” Advances in Mechanical Engineering, vol. 2014, 2014.

[17] C. R. Lin, D. H. Wei, M. K. BenDao, W. E. Chen, and T. Y. Liu, “Development of high-performance UV detector using nanocrystalline diamond thin film,” International Journal of Photoenergy, vol. 2014, 2014.

[18] C.-J. Lin, C.-R. Lin, and S.-K. Yu, “Computer-integrated micro-assembling with image-servo system using ANN,” Applied Mathematics and Information Sciences, vol. 8, no. 1 L, 2014.

[19] C.-R. Lin, D.-H. Wei, M.-K. BenDao, R.-J. Chung, and M.-H. Chang, Nanocrystalline diamond particles prepared by high-energy ball milling method, vol. 284–287. 2013.

[20] W.-H. Liao, C.-R. Lin, and D.-H. Wei, “Effect of CH4 concentration on the growth behavior, structure, and transparent properties of ultrananocrystalline diamond films synthesized by focused microwave Ar/CH4/H2 plasma jets,” Applied Surface Science, vol. 270, 2013.

[21] Y.-C. Lin, W.-S. Chen, B.-Y. Lee, T.-C. Hung, and C.-R. Lin, “A novel circular polarization RFID reader antenna with a multi-bending feeding strip for handheld applications,” Progress In Electromagnetics Research C, vol. 39, 2013.

[22] C.-R. Lin, H.-M. Chang, and C.-K. Chang, “Fabrication of high transparency diamond-like carbon film coating on D263T glass at room temperature as an antireflection layer,” International Journal of Photoenergy, vol. 2013, 2013.

[23] C.-J. Lin, H.-T. Yau, C.-R. Lin, and C.-R. Hsu, “Simulation and experimental analysis for hysteresis behavior of a piezoelectric actuated micro stage using modified charge system search,” Microsystem Technologies, vol. 19, no. 11, 2013.

[24] C.-R. Lin, W.-H. Liao, D.-H. Wei, Y.-R. Shen, C.-L. Chen, C.-L. Dong, and W.-C. Fang, “Fabrication of highly transparent ultrananocrystalline diamond films from focused microwave plasma jets,” Surface and Coatings Technology, vol. 231, 2013.

[25] C.-H. Chao, M.-Y. Chen, C.-R. Lin, Y.-C. Yu, Y.-D. Yao, and D.-H. Wei, “Postannealing effect at various gas ambients on Ohmic contacts of Pt/ZnO nanobilayers toward ultraviolet photodetectors,” International Journal of Photoenergy, vol. 2013, 2013.

[26] W.-H. Liao, C.-R. Lin, D.-H. Wei, Y.-R. Shen, Y.-C. Li, J.-A. Lee, and C.-Y. Liang, “Concurrent improvement in biocompatibility and bioinertness of diamond-like carbon films with nitrogen doping,” Journal of Biomedical Materials Research - Part A, vol. 100 A, no. 11, 2012.

[27] C. Lin, S. Liu, W. Liou, and C. Chang, “Improving the high frequency response of a loudspeaker using hydrogen-free diamond-like carbon film coating at low temperature,” Science China: Physics, Mechanics and Astronomy, vol. 55, no. 3, 2012.

[28] W.-H. Liao, D.-H. Wei, and C.-R. Lin, “Synthesis of highly transparent ultrananocrystalline diamond films from a low-pressure, low-temperature focused microwave plasma jet,” Nanoscale Research Letters, vol. 7, 2012.

[29] C.-J. Lin, C.-R. Lin, S.-K. Yu, and G.-X. Liu, “Development of wireless torque sensing based on surface acoustic wave devices using embedded microchip,” Advanced Science Letters, vol. 8, 2012.

[30] D.-S. Lee, Y.-H. Liu, and C.-R. Lin, “A wireless sensor enabled by wireless power,” Sensors (Switzerland), vol. 12, no. 12, 2012.

[31] C.-M. Hsu, J. H. Chou, C.-Y. Lin, and C.-R. Lin, “Raman Spectral Analysis of Multiwalled Carbon Nanotubes Using a Hierarchical Gaussian Mixture Modeling,” Advanced Science Letters, vol. 9, 2012.

[32] C.-R. Lin, D.-H. Wei, C.-K. Chang, W.-H. Liao, and K. Ran Peng, “Diamond-like carbon films deposited at room temperature on flexible plastics substrates for antireflection coating,” Japanese Journal of Applied Physics, vol. 50, no. 3, 2011.

[33] C.-R. Lin, W.-H. Liao, D.-H. Wei, J.-S. Tsai, C.-K. Chang, and W.-C. Fang, “Formation of ultrananocrystalline diamond films with nitrogen addition,” Diamond and Related Materials, vol. 20, no. 3, 2011.

[34] S.-K. Du, J.-C. Chang, C.-H. Kao, T.-C. Hung, and C.-R. Lin, “Effects of various substrate openings for electronic cooling under forced and natural convection,” World Academy of Science, Engineering and Technology, vol. 78, 2011.

[35] Y.-C. Lin, T.-C. Hung, and C.-R. Lin, “A novel end-shorted printed open loop antenna for IEEE 802.15 2.4 GHz wireless sensor network platform applications,” Wireless Personal Communications, vol. 59, no. 1, 2011.

[36] C.-R. Lin, S.-H. Liu, W.-J. Liou, and C.-K. Chang, “Improvement in the frequency response of loudspeakers by using diamond-like carbon film coatings,” Materials Transactions, vol. 52, no. 10, 2011.

[37] C. R. Lin, D. H. Wei, C. K. Chang, and W. H. Liao, “Optical properties of Diamond-like Carbon films for antireflection coating by RF magnetron sputtering method,” in Physics Procedia, 2011, vol. 18.

[38] R. S. Chen, T. H. Yang, H. Y. Chen, L. C. Chen, K. H. Chen, Y. J. Yang, C. H. Su, and C. R. Lin, “Photoconduction mechanism of oxygen sensitization in InN nanowires,” Nanotechnology, vol. 22, no. 42, 2011.

[39] C.-R. Lin, W.-H. Liao, D.-H. Wei, C.-K. Chang, W.-C. Fang, C.-L. Chen, C.-L. Dong, J.-L. Chen, and J.-H. Guo, “Improvement on the synthesis technique of ultrananocrystalline diamond films by using microwave plasma jet chemical vapor deposition,” Journal of Crystal Growth, vol. 326, no. 1, 2011.

[40] C. R. Lin, W. H. Liao, D. H. Wei, and C. K. Chang, “Fabrication of nanogranular diamond films by MPJCVD system,” in Physics Procedia, 2011, vol. 18. 

[41] C.-C. Wang, M.-C. Wu, S.-Y. Ou, K.-J. Lin, and C.-R. Lin, “Analysis and research on maximum power point tracking of photovoltaic array with Fuzzy Logic Control and Three-point Weight Comparison Method,” Science China Technological Sciences, vol. 53, no. 8, 2010.

Go to top